Appendix B : Battery Replacement In The Rcu - Barco R9001330 Owner's Manual

Appendix B : Battery Replacement in the RCU

Battery replacement in the RCU.
Remove the battery cover on he backside of the remote control by pushing the indicated handle a
little to the bottom of the RCU. Lift up the top side of the cover at the same time.
(fig. 1)
Remove the battery from the compartment and disconnect the contact plate. (fig. 2)
Connect a new 9 V battery (E-block type, e.g. type 6F22S or equivalent) to the contact plate.
Insert the battery back into the compartment.
Put the cover back.
fig. 1
Contact
plate
Battery
fig. 2
3 1 0 a . D R W
B-1
5975288 BARCOGRAPHICS 8200 110497