Roland TrueVIS SG-300 User Manual page 78

O ther B asic O p erations
• Be sure to remove the media clamps. If you attempt to perform the cuto operation while the media
clamps are attached, the machine will detect them and interrupt the operation.
• Even if you enable the automatic media-cuto function in the software RIP, if the media clamps are
attached, the machine will detect them and interrupt the operation.
• When performing cuto , do not use [ ] to pull the media back. Unless the end of the media has been
pulled out to a location in front of the platen, cuto may not be performed smoothly.
2
G ive A ttentio n to the Media Com p os ition
• For some types of media, cuto is not possible.
• Some types of media may remain on the platen after cuto . If the media remains on the platen, remove
it by hand.
7 6