Roland TrueVIS SG-300 User Manual page 50

B asic P rinting Method
C
Check the test p attern
Check for misalignment in the cutting position and printing position.
2
D
< Cutting p osition and p rinting p osition are not aligned>
P ress [ ] to select " Y ES."
< Cutting p osition and p rinting p osition are aligned>
P ress [ ] to select " DO NE."
E
ress
If you select "YES," the test pattern (C&C2) for setting the correction values is printed and cut. Pro-
ceed to the next procedure.
If you select "DONE," proceed to step
F
P ress [ ENTER] .
INPUT
G
Check the correction values f rom the test p attern (C& C2 ) condition.
The point where the cutting line intersects the correction-value scale is the correction value. Check
the scan direction (the direction of print head movement) and the feed direction (the media feed
direction).
C o r r e c t i o n -v a
F e e d d i r e c t i o n
48
condition.
( C & C 1)
P r i n t i n g p o s i t i o n a n d c u t t i n g
p o s i t i o n a r e m i s a l i g n e d .
to con rm our entr
l u e s c a l e
C u t t i n g p o s i t i o n
P r i n t i n g p o s i t i o n
P r i n t i n g p o s i t i o n a n d c u
p o s i t i o n a r e a l i g n e d .
.
10
S c a n d i r e c t i o n
C u t t i n g l i n e
t t i n g
C u t t i n g l i n e
I n t h i s c a s e , t h e c o r r e c t i o n
v a l u e i s " -0. 3 . "