Roland TrueVIS SG-300 User Manual page 48

B asic P rinting Method
D
< Cutting p osition and p rinting p osition are not aligned>
P ress [ ] to select " Y ES."
< Cutting p osition and p rinting p osition are aligned>
P ress [ ] to select " DO NE."
2
E
ress
If you select "YES," the test pattern (P&C2) for setting the correction values is printed and cut. Pro-
ceed to the next procedure.
If you select "DONE," proceed to step
F
P ress [ ENTER] .
INPUT
G
Check the correction values f rom the test p attern (P & C2 ) condition.
The point where the cutting line intersects the correction-value scale is the correction value. Check
the scan direction (the direction of print head movement) and the feed direction (the media feed
direction).
F e e d d i r e c t i o n
H
Set the correction values f or the f eed direction " F" and the scan direction " S."
1
P ress [ ] or [ ] to set the correction value f or the f eed direction (F).
F:+0.30 -0.30mm
S:-0.40 -0.20mm
2
P ress [ ] or [ ] to set the correction value f or the scan direction (S).
F:+0.30 -0.30mm
S:-0.40 -0.20mm
46
to con rm our entr
C o r r e c t i o n -v a l u e s c a l e
.
9
S c a n d i r e c t i o n
C u t t i n g l i n e
C u t t i n g l i n e
I n t h i s c a s e , t h e
c o r r e c t i o n v a l u e
i s " -0. 3 . "