Roland TrueVIS SG-300 User Manual page 105

F
W hen the f ollowing screen is disp lay ed, rep lace the tray p ads.
There are three tray pads. Replace all three tray pads.
Im p ort ant
Place the tray pad with an orientation that matches the shape of the wiper tray. If you place the tray
pad with the incorrect orientation, it will not be possible to clean the wiper correctly.
G
P ress [ ENTER] .
H
W hen the f ollowing screen is disp lay ed, close the right cover.
The screen shown below appears, and then the machine is lled with TR cleaning liquid. The (ap-
proximate) remaining time for the procedure is displayed on the screen. (The display shown below
is an example. "01:40" = "1 minute and 40 seconds")
>>>>> 01:40
CLEANING...
>> 01:45
If the TR cleaning liquid runs out during lling, the screen shown below appears. Replace the TR
cleaning liquid pouch. When you replace the TR cleaning liquid pouch, the display returns to the
original screen.
"
P . 68 " TR C l e a n i n g L i q u i d P o u c h
When the following screen is displayed again, the wiper tray cleaning is nished.
MAINTENANCE
TRAY CLEANING
I
P ress [ MENU] to go back to the original screen.
Re p l a c e m e n t "
* " C L -L I Q U I D F O R W I P E R" r e p r e s e
Rep lacing Consumable P arts
Tr a y p a d
n t s t h e TR c l e a n i n g l i q u i d .
3
10 3