Roland TrueVIS SG-300 User Manual page 171

5.
Relocate the machine.
A
W hen the p re p aration f or trans f er is com p lete , trans p ort the machine as soon as
p ossible.
B
Reinstall the p rinter immediately and then remove the retainer securing the p rint heads.
For storage, attach the retainer in the position indicated in the gure.
C
Switch on the main p ower.
IM P O R TAN T
To prevent the print heads from being damaged, complete the relocation without taking too much
time, and turn on the main power of the machine immediately after it is transferred. To install the
machine again, follow the procedure in the Setup Guide.
D
Switch on the sub p ower.
E
W hen the f ollowing screen is disp lay ed, p ress [ ENTER] .
The screen shown below appears, and then the machine is lled with TR cleaning liquid. The
(approximate) remaining time for the procedure is displayed on the screen. (The display shown
below is an example. "01:40" = "1 minute and 40 seconds")
FILLING LIQUID
>>>>>
Once the machine is lled with TR cleaning liquid, the following screen is displayed and the power
turns on.
01:40
W hen Moving the Unit
16 9
5