Roland TrueVIS SG-300 User Manual page 148

Advanced Settings f or P rinting and Cutting with Crop Mark s
G
P ress [ MENU] , then [ ] to disp lay the screen shown below.
H
P ress [ ENTER] .
The test pattern (C&C1) is printed and cut. If the printing and cutting lines are aligned, adjustment
is complete. If further adjustment is needed, press [ ] then [ ] to go back to step
the adjustment.
Descrip tion
Depending on the composition of the media, the positioning of printing and cutting may be misaligned even
when you are using crop marks. Make corrections for misaligned printing and cutting for the media you are
using.
Def ault Settings
[F] (correction value of the media feed direction): 0.00 mm
[S] (correction value of the cutting carriage movement direction): 0.00 mm
4
146
F
and ne-tune