Roland TrueVIS SG-300 User Manual page 152

P erf orming O p erations f rom Roland DG
 The devices are in the vicinity of a microwave that is in use.
 Other electromagnetic waves are generated in the location.
• Bluetooth communication uses the same frequency band (2.4 GHz) as wireless LAN (IEEE802.11b/g). If
the devices are used in the vicinity of equipment in which a wireless LAN unit is installed, the connection
status may become unstable due to the occurrence of radio-frequency interference. In this situation,
carry out the following countermeasures.
 When using Bluetooth communication to connect the printer and the mobile terminal, do so at a
distance of 10 m (32.8 ft.) or more away from the equipment in which a wireless LAN unit is installed.
 Bring the mobile terminal and the printer as close together as possible.
 If using Bluetooth communication within 10 m (32.8 ft.) of the equipment in which a wireless LAN
unit is installed, turn o the wireless LAN unit.
• The radio waves generated by Bluetooth communication may have an e ect on the operation of electronic
medical equipment and similar devices. This may lead to accidents, so turn o Bluetooth communication
in the following locations.
 The vicinity of in-use hearing aids and pacemakers
 Hospitals
 The vicinity of automatic doors and re alarms
"
P . 15 9 " Tu r n i n g o n B l u e t o o t h C o m m u n i c a
• Using Bluetooth communication in the vicinity of TVs or radios may lead to noise in the image or audio.
4
• Roland DG Corp. accepts no responsibility for the leakage of information during a connection using
Bluetooth technology.
• The mobile terminal that you are using to connect to the printer must comply with Bluetooth standards
determined by the Bluetooth SIG and must be a certi ed device.
• Even if the mobile terminal complies with the Bluetooth standards outlined above, phenomena may
occur due to the characteristics and speci cations of the device. Examples of these phenomena include
the inability to connect to the printer and the operation methods, display, and operations being di erent.
• Depending on the mobile terminal that you are connecting to the printer, it may take some time until
the Bluetooth connection can be established.
• While the Bluetooth connection is established, do not cover the mobile terminal with your hand or
anything else.
• Doing so may hinder the Bluetooth connection.
O t h e r i m p o r t a n t n o t e s
• Bluetooth communication may increase the mobile terminal's battery consumption.
• Additional communication charges apply to the downloading of the application. You will have to bear
the communication charges.
• Note that it may take time to con rm whether this application is supported by new mobile terminals.
• Depending on the usage environment, this application may not operate normally even with mobile
terminals that have been con rmed to be supported.
15 0
Mobile P anel
t i o n "