Roland TrueVIS SG-300 User Manual page 38

B asic P rinting Method
D
Lower the loading lever (f ront).
The media is held in place.
2
E
Line up the edges of the media with the centers of the holes of the media clamp s (lef t
and right).
When you are performing cutting only, do not use the media clamps.
" P . 5 7 , " I m p o r t a n t N o t e o n C u t t i n g "
F
Close the f ront cover.
If the [PRESS ENTER KEY TO CONTINUE] message appears on the screen, press [ENTER].
When the front cover is closed, the print-head carriage moves and detects the width of media. This
operation is called initialization. When initialization ends, [SETUP] on the operation panel lights, and
the printable width is displayed on the screen. This completes the setup of the media.
I m p o r t a n t : R e m o v e r o l l m e d i a w h e n n o t i n u s e .
Do not leave roll media loaded on the machine for a long period of time. Be sure to remove and store the
media when not in use. Leaving the roll media loaded on the machine for a long period of time will cause the
media to sag, which may deteriorate the printing quality and may also lead to motor errors.
36