Unpacking - ABB CONCEPTPOWER CLASSIC DPA-50 User Manual

1.4.3 Unpacking

Unpack the equipment by removing the packing and shipping materials. Make a visual inspection and check that
'Tip&Tel' indicator ( "FRAGILE" and "ARROW") on the packing container is intact.
Perform the following steps to unpack the UPS equipment from the pallet and make sure that the floor surface is
solid and suitable for the wheeling and heavy weight:
1) Examine the UPS for any sign of damage. Notify your carrier or supplier immediately if damage is
apparent;
2) Remove the plastic cover from the UPS;
3) Remove pallet from the UPS;
1) 1)
2)
04-3008_S1_ABB_OPMCPDPA-S2_GB_121202
Printed in Switzerland – Modifications reserved
!
HEAVY !
KG
3)
Section-1
3)
Page 12/22 ABB