Table of Contents
Advertisement
Figure 2: Maximum Multiple Cabinet Configuration; 6 Cabinets, 30 Modules
Transport – Storage – Unpacking
4
4.1
Visual Inspection
Upon receiving the goods, make sure that they corresponds to the material indicated in the delivery note. Carefully examine the packed
unit(s) for any sign of physical damage. In case of damaged unit(s) or even suspect of damaged inform immediately:
The carrier
The manufacturer
VISIBLE TRANSPORT DAMAGES MUST BE CLAIMED TO THE CARRIER IMMEDIATELY AFTER
RECEIPT.
OTHER CLAIM FOR SHIPPING DAMAGE MUST BE FILED ALSO IMMEDIATELY AND THE CARRIER
IMPORTANT
MUST BE INFORMED WITHIN 7 DAYS OF RECEIPT OF THE EQUIPMENT. THE PACKING
NOTES
MATERIALS SHOULD BE STORED FOR FURTHER INVESTIGATION.
4.2
Storage
The shipping packaging of the UPS protects it from mechanical and environmental damage normal to the shipping/storage process. UPS
and Battery cabinets should be stored in their original packaging. Make sure that the UPS and Battery cabinets are stored indoors,
protected from water and sunshine in a clean environment.
THE RECOMMENDED TEMPERATURE FOR STORAGE OF THE UPS SYSTEM AND BATTERIES IS
BETWEEN +20 °C AND +25°C, HUMIDITY < 95% (NON-CONDENSING).
FOR UPS SYSTEM ONLY THE STORAGE TEMPERATURE CAN BE BETWEEN -25 °C AND +70°C,
IMPORTANT
HUMIDITY < 95% (NON-CONDENSING).
NOTES
BEFORE SWITCHING ON THE UNIT(S), MAKE SURE THE AMBIENT TEMPERATURE HAS BEEN
WITHIN THE ACCEPTABLE OPERATION TEMPERATURE RANGE (0°C - 40°C) FOR AT LEAST 8
HOURS.
SEALED BATTERIES MUST NEVER BE STORED IN A DISCHARGED OR PARTIALLY DISCHARGED
STATE.
EXTREME TEMPERATURE, UNDER- AND OVERCHARGE AND OVERDISCHARGE WILL DESTROY
BATTERIES!
FOR LONG-TERM STORAGE, MAKE SURE THAT THE BATTERY IS FULLY RECHARGED EVERY SIX
(6) MONTHS. CHARGE THE BATTERY BEFORE AND AFTER EVERY PERIOD OF STORAGE.
Conceptpower DPA 500 480V UL │94-12-043275 A02 13
Advertisement
Table of Contents
