Installation; Delivery, Transportation, Positioning And Storage; Receipt Of The Ups And Visual Inspection; Unpacking List - ABB PowerValue 11 RT G2 User Manual

10 A B B U P S P R O D U C T S A N D S O L U T I O N S
—

3 Installation

—

3 .1 Delivery, transportation, positioning and storage

3 .1 .1 Receipt of the UPS and visual inspection

When receiving the UPS, carefully examine the
packing container and the UPS for any signs of
physical damage. In case of damage, notify the
carrier immediately.
The UPS packing container protects it
from mechanical and environmental damage.
To increase protection, the UPS is wrapped in a
plastic sheet. Keep the packaging for later re-use.

3 .1 .2 Unpacking list

After examining the package, open the box
and check that the following items are included:
• 1 x PowerValue 11 RT G2 UPS
• 1 X user manual
• 1 X USB with complete documentation and
software
• 2 x UPS stands (support)
• 4 x M4 round screw & 4 x M4 Hex screw
(UPS stands)
• 1 x USB cable
• 1 x monitoring software CD
• 1x input power cord(5-15P+IEC C13 for 1K,1.5K;
5-20P+IEC C19 for 2K)
Rack-mounting accessories (full rack-mounting
kit can be purchased separately):
• 2 x Rack mount ear
• 8 x M4 screw (Rack mount ears)
Examine the UPS for any signs of damage and
ensure that the received UPS corresponds to the
material indicated in the delivery note. Notify
your carrier or supplier immediately in case of
any damage.
For Pluggable Equipment - The socket-outlet shall
be installed near the equipment and shall be
easily accessible.
3 .1 .3 Operation of the UPS
The Units are considered acceptable for use in a
maximum ambient temperature of 40°C (104°F).
The UPS system contains no user-serviceable
parts. If the battery service life (3~5 years at 25°C
ambient temperature) has been exceeded,
the batteries must be replaced. In this case,
please contact your dealer.
Be sure to deliver the spent battery to a
recycling facility or ship it to your dealer in the
replacement battery packing material.
3 .1 .4 Storage of the UPS
Before storing, charge the UPS for five hours.
Store the UPS covered and upright in a cool,
dry location. During storage, recharge the
battery in accordance with the following table:
Storage Temperature Recharge Frequency Charging Duration
-25°C - 40°C Every 3 months
40°C - 45°C Every 2 months
1-2 hours
1-2 hours