Changing The Wi-Fi Direct (Simple Ap) Settings Such As The Ssid - Epson WF-C5890 Series User Manual
Hide thumbs
Also See for WF-C5890 Series:
- Start here (4 pages) ,
- User manual (438 pages) ,
- Start here (4 pages)
Table of Contents
Advertisement
In These Situations
>
>
...
Connecting a Smart Device and Printer Directly (Wi-Fi Direct)
Changing the Wi-Fi Direct (
1. Tap
on the printer's home screen.
2. Select Wi-Fi Direct.
The Wi-Fi Direct information is displayed.
3. Tap Start Setup.
4. Tap
.
5. Select Disable Wi-Fi Direct.
6. Tap the Disable the settings.
7. Follow the on-screen instructions.
Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID
When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from
> Wi-Fi
Direct > Start Setup >
, and then the following menu items are displayed.
Change Network Name
Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary
name. You can set the network name (SSID) in ASCII characters that is displayed on the software keyboard on the
control panel. You can enter up to 22 characters.
When changing the network name (SSID), all connected devices are disconnected. Use the new network name
(SSID) if you want to re-connect the device.
Change Password
Change the Wi-Fi Direct (simple AP) password for connecting to the printer to your arbitrary value. You can set
the password in ASCII characters that is displayed on the software keyboard on the control panel. You can enter 8
to 22 characters.
When changing the password, all connected devices are disconnected. Use the new password if you want to re-
connect the device.
Change Frequency Range
Change the frequency range of Wi-Fi Direct used for connecting to the printer. You can select 2.4 GHz or 5 GHz.
When changing the frequency range, all connected devices are disconnected. Re-connect the device.
Note that you cannot re-connect from devices that do not support 5 GHz frequency range when changing to 5
GHz.
Disable Wi-Fi Direct
Disable Wi-Fi Direct (simple AP) settings of the printer. When disabling it, all devices connected to the printer in
Wi-Fi Direct (Simple AP) connection are disconnected.
283
Advertisement
Table of Contents
Troubleshooting
