Table of Contents
Advertisement
User's Guide
Running Web Config on a Web Browser
1. Check the printer's IP address.
Tap the network icon on the printer's home screen, and then tap the active connection method to confirm the
printer's IP address.
Note:
You can also check the IP address by printing the network connection report.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the maintenance screen of Epson iPrint.
Related Information
"Using Epson iPrint" on page 80
&
"Printing a Network Connection Report" on page 32
&
Running Web Config on Windows
When connecting a computer to the printer using WSD, follow the steps below to run Web Config.
1. Open the printer list on the computer.
❏ Windows 10/Windows Server 2016
Click on the start button, and then select Windows System > Control Panel > View devices and printers in
Hardware and Sound.
❏ Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
❏ Windows 7/Windows Server 2008 R2
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
❏ Windows Vista/Windows Server 2008
Click the start button, and select Control Panel > Printers in Hardware and Sound.
2. Right-click on your printer and select Properties.
3. Select the Web Service tab and click the URL.
Network Service and Software Information
161
Advertisement
Table of Contents
