YASKAWA DX200 Instructions Manual page 79

170625-1CD
ES200RD II
9 Maintenance and Inspection
9.3 Grease Replenishment/Exchange
4. Reinstall the plugs and screws to the exhaust port of the connection
and . Before installing the plug, apply Three Bond 1206C on the
thread part of the plug and screw, then tighten the plug with a
tightening torque of 4.9 N•m (0.5 kgf•m).
5. Remove the grease zerk from the grease inlet of the connection
and , and reinstall the plug. Before installing the plug, apply Three
Bond 1206C on the thread part of the plug. Then tighten the plug with
a tightening torque of 4.9 N•m (0.5 kgf•m).
9-24
79 of 100
HW1482737