YASKAWA DX200 Instructions Manual page 61

170625-1CD
ES200RD II
Board
(Type: SGDR-EFBA02A)
9 Maintenance and Inspection
9.2 Notes on Maintenance Procedures
Fig. 9-3: Battery Connection
See the step 5.
Connector
1. Turn OFF the DX200 main power supply.
2. Remove the plate fixing screws and the plate on the connector base,
then pull the battery pack out to replace it with the new one.
3. Remove the battery pack from the battery holder.
4. Connect the new battery pack to the unoccupied connector on the
board.
5. Remove the old battery pack from the board.
Remove the old battery pack after connecting the new one
NOTE
so that the encoder absolute data does not disappear.
6. Mount the new battery pack to the holder.
7. Reinstall the plate.
Do not allow the plate to pinch the cables when reinstalling
NOTE
the plate.
9-6
Battery pack before replacement
See the step 4.
New battery pack
(HW0470360-A)
HW1482737
61 of 100