Proxim ORiNOCO AP-700 User Manual page 117

Advanced Configuration
SSID/VLAN/Security
Figure 4-45 SSID/VLAN Edit Entries Screen (VLAN Tagging Enabled)
4. Enter a unique Network Name (SSID) between 1 and 32 characters. This parameter is mandatory.
NOTE: Do not use quotation marks (single or double) in the Network Name; this will cause the AP to misinterpret the
name.
5. Enter a unique VLAN ID. This parameter is mandatory.
• A VLAN ID is a number from -1 to 4094. A value of -1 means that an entry is "untagged."
• You can set the VLAN ID to "-1" or "untagged" if you do not want clients that are using a specific SSID to be
members of a VLAN workgroup. Only one "untagged" VLAN ID is allowed per interface.
• The VLAN ID must match an ID used by your network; contact your network administrator if you need assistance
defining the VLAN IDs.
6. Enable or disable the SSID Authorization status from the drop-down menu. SSID Authorization is the RADIUS-based
authorization of the SSID for a particular client. The authorized SSIDs are sent as the tunnel attributes.
AP-700 User Guide
117