Security Parameters - Proxim ORiNOCO AP-700 User Manual

Command Line Interface (CLI)
Parameter Tables

Security Parameters

MAC Access Control Parameters
Name
MAC Address Control
Status
Operation Type
MAC Access Control Table
Name
MAC Address Control
Table
Table Index
MAC Address
Comment (optional)
Status (optional)
Rogue Scan Configuration Table
The Rogue Scan Configuration Table allows you to enable or disable Rogue Scan and configure the scanning
parameters.
Name
Rogue Scan
Configuration Table
Rogue Scan Mode
Rogue Scan Cycle Time Integer
Rogue Scan
Configuration Table Index
Rogue Scan Status
Hardware Configuration Reset
The Hardware Configuration Reset commands allows you to enable or disable the feature and to change the password to
be used for configuration reset during boot up.
Type
Group N/A
Integer enable
disable (default)
Integer passthru (default)
block
Type
Table N/A
N/A N/A
PhysAddress User Defined
DisplayString User Defined
max 254 characters
Integer enable (default)
disable
delete
Type
Table N/A
Integer Bkscan (1)
Contscan (2)
1 - 1440
Integer 3 or 4
Integer enable
disable
Value Access
R
RW
RW
Value Access
R
R
RW
RW
RW
Value Access
R
RW
RW
RW
RW
AP-700 User Guide
CLI Parameter
macacl
aclstatus
macacloptype
CLI Parameter
macacltbl
index
macaddr
cmt
status
CLI Parameter
rscantbl
mode
cycletime
index
status
197