Proxim ORiNOCO AP-700 User Manual page 181

Command Line Interface (CLI)
Parameter Tables
802.11a Only Parameters
Name
Operating Frequency
Channel
Supported Data Rates
Transmit Rate
Physical Layer Type
Super Mode
Turbo Mode*
* Super mode must be enabled on the wireless interface before Turbo mode can be enabled.
Type
Integer Varies by regulatory
domain and country. See
Available Channels
Octet String See Transmit Rate,
below
Integer32 0 (Auto Fallback; default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
Integer ofdm (orthogonal
frequency division
multiplexing) for 802.11a
Integer enable
disable (default)
Integer enable
disable (default)
Value Access
RW
R
RW
R
RW
RW
AP-700 User Guide
CLI Parameter
channel
suppdatarates
txrate
phytype
supermode
turbo
181