Retrieve File; Retrieve File Via Tftp - Proxim ORiNOCO AP-700 User Manual

Commands

Retrieve File

A warning message gets displayed that advises the user that a reboot of the device will be required for changes to
take effect.
Figure 6-4 Warning Message
4. Click OK to continue with the operation or Cancel to abort the operation.
NOTE: An HTTP file transfer using SSL may take extra time.
If the operation completes successfully the following screen appears.
Figure 6-5 Update AP Successful
If the operation did not complete successfully the following screen appears, and the reason for the failure is displayed.
Figure 6-6 Update AP Unsuccessful
Retrieve File

Retrieve File via TFTP

Use the Retrieve File via TFTP tab to upload files from the AP to the TFTP server. The TFTP server must be running
and configured to point to the directory to which you want to copy the uploaded file. We suggest you assign the file a
meaningful name, which may include version or location information.
If you don't have a TFTP server installed on your system, install the TFTP server from the ORiNOCO CD. You can either
install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD's Xtras/SolarWinds
sub-directory.
The Retrieve AP via TFTP tab shows version information and allows you to enter TFTP information as described below.
• Server IP Address: Enter the TFTP server IP Address.
AP-700 User Guide
133