Proxim ORiNOCO AP-700 User Manual page 183

Command Line Interface (CLI)
Parameter Tables
Name
Transmit Rate
Physical Layer Type
Super Mode
†
Turbo Mode
* Also for 802.11g-wifi mode. 802.11g-wifi has been defined for Wi-Fi testing purposes; it is not recommended for use in your wireless network
environment.
† Super mode must be enabled on the wireless interface before Turbo mode can be enabled.
Type
Integer32 For 802.11b-only
mode:
0 (auto fallback; default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
For 802.11g-only
mode:*
0 (auto fallback; default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
For 802.11b/g mode:
0 (auto fallback; default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
Integer ERP (Extended Rate
Protocol)
Integer enable
disable (default)
Integer enable
disable (default)
Value Access
RW
R
RW
RW
AP-700 User Guide
CLI Parameter
txrate
phytype
supermode
turbo
183