Monitoring - Proxim ORiNOCO AP-700 User Manual

Monitoring

This chapter discusses the following monitoring options:
• Version: Provides version information for the Access Point's system components.
• ICMP: Displays statistics for Internet Control Message Protocol packets sent and received by the AP.
• IP/ARP Table: Displays the AP's IP Address Resolution table.
• Learn Table: Displays the list of nodes that the AP has learned are on the network.
• IAPP: Provides statistics for the Inter-Access Point Protocol messages sent and received by the AP.
• RADIUS: Provides statistics for the configured RADIUS server(s).
• Interfaces: Displays the Access Point's interface statistics (Wireless and Ethernet).
• Station Statistics:
To monitor the AP using the HTTP/HTTPS interface, you must first log in to a web browser. See
instructions.
You may also monitor the AP using the command line interface. See
To monitor the AP via HTTP/HTTPS:
1. Click the Monitor button located on the left-hand side of the screen. The main Monitor screen will be displayed.
Figure 5-1 Monitor Main Screen
2. Click the tab that corresponds to the statistics you want to review. For example, click Learn Table to see the list of
nodes that the AP has discovered on the network.
3. If necessary, click the Refresh
Each Monitor tab is described in the remainder of this chapter.
Displays statistics for stations and Wireless Distribution System links.
button to update the statistics.
Command Line Interface (CLI)
AP-700 User Guide
5
Logging In for
for more information
119