System; Dynamic Dns Support - Proxim AP-4000 User Manual

Advanced Configuration

System

System
You can configure and view the following parameters within the System Configuration screen:
• Name: The name assigned to the AP. See the
sections for rules on naming the AP.
• Location: The location where the AP is installed.
• Contact Name: The name of the person responsible for the AP.
• Contact Email: The email address of the person responsible for the AP.
• Contact Phone: The telephone number of the person responsible for the AP.
• Object ID: This is a read-only field that displays the Access Point's system object identification number; this
information is useful if you are managing the AP using SNMP.
• Ethernet MAC Address: This is a read-only field that displays the unique MAC (Media Access Control) address for
the Access Point's Ethernet interface. The MAC address is assigned at the factory.
• Descriptor: This is a read-only field that reports the Access Point's name, serial number, current image software
version, and current bootloader software version.
• Up Time: This is a read-only field that displays how long the Access Point has been running since its last reboot.
Figure 4-2 System Tab

Dynamic DNS Support

DNS is a distributed database mapping the user readable names and IP addresses (and more) of every registered
system on the Internet. Dynamic DNS is a lightweight mechanism which allows for modification of the DNS data of host
systems whose IP addresses change dynamically. Dynamic DNS is usually used in conjunction with DHCP for assigning
meaningful names to host systems whose IP addresses change dynamically.
Access Points provide DDNS support by adding the host name (option 12) in DHCP Client messages, which is used by
the DHCP server to dynamically update the DNS server.
Dynamic DNS Support and
AP-4000 Series User Guide
Access Point System Naming Convention
44