Proxim AP-4000 User Manual page 200

Command Line Interface (CLI)
Parameter Tables
Serial Port Parameters
Name
Serial
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
RADIUS Based Management Access Parameters
The RADIUS Based Management Access parameters allow you to enable HTTP or Telnet Radius Management Access,
enable or disable local user access, and configure the local user password.
The default local user ID is root and the default local user password is public. "Root" cannot be configured as a valid user
for RADIUS based management access when local user access is enabled.
Name
Radius Local User Status Integer
Radius Local User
Password
HTTP Radius
Management Access
Telnet Radius
Management Access
SSH Parameters
The following commands enable or disable SSH and set the SSH host key.
Name
SSH Status
SSH Public Host Key
Fingerprint
SSH Host Key Status
The AP SSH feature, open-SSH, confirms to the SSH protocol, and supports SSH version 2. The following SSH clients
have been verified to interoperate with the AP's server. The following table lists the clients, version number, and the
website of the client.
Clients
OpenSSH
Putty
Zoc
Axessh
For key generation, only the OpenSSH client has been verified.
Type
Group N/A
Integer 2400, 4800,9600
(default), 19200, 38400,
57600
Integer 8
Integer none
Integer 1
Value none (default)
xonxoff
Type
enable
disable
DisplayString User Defined
Integer enable
disable
Integer enable
disable
Type
Integer enable
disable
DisplayString AP Generated
Integer create
delete
Version
V3.4-2 http://www.openssh.com
Rel 0.53b http://www.chiark.greenend.org.uk
5.00 http://www.emtec.com
V2.5 http://www.labf.com
Value Access
R
RW
R
R
R
RW
Value Access
RW
RW
RW
RW
Value Access
RW
RW
RW
Website
AP-4000 Series User Guide
CLI Parameter
serial
serbaudrate
serdatabits
serparity
serstopbits
serflowctrl
CLI Parameter
radlocaluserstatus
radlocaluserpasswd
httpradiusmgmtaccess
telradiusmgmtaccess
CLI Parameter
sshstatus
sshkeyfprint
sshkeystatus
200