Proxim AP-4000 User Manual page 210

Command Line Interface (CLI)
Parameter Tables
Name
Hardware Configuration
Reset Status
Configuration Reset
Password
Security Profile Table
The Security Profile Table allows you to configure security profiles. A maximum of 16 security profiles are supported per
wireless interface.
Each security profile can be enable and configure one or more security modes (None Secure Station, WEP Station,
802.1x Station, WPA Station, WPA-PSK Station). The WEP/PSK parameters are separately configurable for each security
mode. See the command examples below for more information.
Name
Security Profile Table
Table Index
Security Mode
Authentication Mode
Cipher
Encryption Key 0
Encryption Key 1
Encryption Key 2
Encryption Key 3
Encryption Transmit Key Integer
Encryption Key Length
Rekey Interval
WPA PSK Value
WPA PSK Pass Phrase
Type
Integer enable (1)
disable (2)
DisplayString User Defined
Type
Table N/A
Integer 1.1 to 32.5
Integer nonsecsta
wepsta
802.1xsta
wpasta
wpapsksta
Integer none
802.1x
psk
Integer none
wep
tkip
aes
Integer User defined
Integer User defined
Integer User defined
Integer User defined
0 - 3
Integer 64, 128, or 152
Integer
Integer
Integer 8 - 64 characters
Value Access
R
RW
Value Access
R
R
R
R
R
W
W
W
W
RW
RW
RW
W
W
AP-4000 Series User Guide
CLI Parameter
hwconfigresetstatus
configresetpasswd
CLI Parameter
secprofiletbl
index
secmode
authmode
ciphersuite
encryptionkey0
encryptionkey1
encryptionkey2
encryptionkey3
encryptkeytx
encryptkeylength
rekeyint
pskkey
passphrase
210