Proxim AP-4000 User Manual page 84

Advanced Configuration
Filtering
4. Set the destination Port Number (a value between 1 and 65535) to filter. See the IANA Web site at
http://www.iana.org/assignments/port-numbers
5. Set the Port Type for the protocol: TCP, UDP, or both (TCP/UDP).
6. Set the Interface to filter:
• Ethernet
• Wireless Slot A
• Ethernet and Wireless Slot A
• Wireless Slot B
• Ethernet and Wireless Slot B
• Wireless Slot A and B
• All interfaces
7. Click OK.
Editing TCP/UDP Port Filters
1. Click Edit under the TCP/UDP Port Filter Table heading.
2. Make any changes to the Protocol Name or Port Number for a specific entry, if necessary.
3. In the row that defines the port, set the Status to Enable, Disable, or Delete, as appropriate.
4. Select OK
.
for a list of assigned port numbers and their descriptions.
AP-4000 Series User Guide
84