Proxim AP-4000 User Manual page 192

Command Line Interface (CLI)
Parameter Tables
Distance Between
APs
Mini
Micro
§ When the AP-4900M is configured to use the 4.9 GHz Public Safety operational mode, antenna diversity is disabled, and antenna 3 is stati-
cally configured for use. If an operational mode other than 4.9 Public Safety is configured, antenna diversity is configurable by the administra-
tor.
** WDS and Mesh technologies have been designed for outdoor use. Each 802.11 packet is acknowledged by the receiving station. On links
longer than about 100m, the time that it takes for the ACK to get back to the sending station is long enough to cause the sending station to
believe that the packet was not properly received. This problem can be corrected by adjusting the AP Link Length parameter to a value that
is larger than the length in meters of the longest link being serviced by that AP.
802.11a Only Parameters
Name
Operating Frequency
Channel
Supported Data Rates
Transmit Rate
Physical Layer Type
Super Mode
Turbo Mode*
* Super mode must be enabled on the wireless interface before Turbo mode can be enabled. Turbo mode and Mesh mode (either Mesh AP or
Mesh Portal) can not be enabled on the same interface simultaneously.
Receive Sensitivity Threshold
Value dBm
25 -70
33 -62
Type
Integer
Octet String
Integer32
Integer
Integer
Integer
Transmit Defer Threshold
Value
53 -42
59 -36
Value
Varies by regulatory
domain and country. See
Available Channels
See Transmit Rate,
below
0 (Auto Fallback; default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
ofdm (orthogonal
frequency division
multiplexing) for 802.11a
enable
disable (default)
enable
disable (default)
AP-4000 Series User Guide
dBm
Access CLI Parameter
RW channel
R suppdatarates
RW txrate
R phytype
RW supermode
RW turbo
192