Network Parameters - Proxim AP-4000 User Manual

Command Line Interface (CLI)
Parameter Tables

Network Parameters

IP Configuration Parameters
Name
Network
IP Configuration
IP Address
IP Mask
Default Router IP
Address
Default TTL
Address Type
NOTE: The IP Address Assignment Type (ipaddrtype) must be set to static before the IP Address (ipaddr), IP Mask
(ipmask) or Default Gateway IP Address (ipgw) values can be entered.
DNS Client for RADIUS Name Resolution
Name
DNS Client
DNS Client status
Primary DNS Server IP
Address
Secondary DNS Server
IP Address
Default Domain Name
DHCP Server Parameters
Name
DHCP Server
DHCP Server Status
Gateway IP Address
Primary DNS IP Address IpAddress
Secondary DNS IP
Address
Number of IP Pool Table
Entries
NOTE: The DHCP Server (dhcpstatus) can only be enabled after a DHCP IP Pool table entry has been created.
Type
Group N/A
Group N/A
IpAddress User Defined
IpAddress User Defined
IpAddress User Defined
Integer User Defined (seconds)
0 - 255, 64 (default)
Integer static
dynamic (default)
Type
Group N/A
Integer enable
disable (default)
IpAddress User Defined
IpAddress User Defined
Integer32 User Defined (up to 254
characters)
Type
Group N/A
Integer enable (1) (default)
disable (2)
delete (3)
IpAddress User Defined
User Defined
IpAddress User Defined
Integer32 N/A
Value Access
R
R
RW
RW
RW
RW
RW
Value Access
R
RW
RW
RW
RW
Value Access
R
RW
RW
RW
RW
R
AP-4000 Series User Guide
CLI Parameter
network
ip (Note: The network and
ip parameters display the
same information)
ipaddr
ipmask
ipgw
ipttl
ipaddrtype
CLI Parameter
dns
dnsstatus
dnspridnsipaddr
dnssecdnsipaddr
dnsdomainname
CLI Parameter
dhcp
dhcpstatus
dhcpgw
dhcppridnsipaddr
dhcpsecdnsipaddr
dhcpippooltblent
188