Filtering Parameters - Proxim AP-4000 User Manual

Command Line Interface (CLI)
Parameter Tables

Filtering Parameters

Ethernet Protocol Filtering Parameters
Name
Ethernet Filtering
Filtering Interface
Bitmask
Operation Type
Ethernet Filtering Table
Identify the different filters by using the table index.
Name
Ethernet Filtering Table
Table Index
Protocol Number
Protocol Name (optional) DisplayString
Status (optional)
NOTE: The filter Operation Type (passthru or block) applies only to the protocol filters that are enabled in this table.
Static MAC Address Filter Table
Name
Static MAC Address Filter
Table
Table Index
Static MAC Address on
Wired Network
Static MAC Address
Mask on Wired Network
Static MAC Address on
Wireless Network
Static MAC Address
Mask on Wireless
Network
Comment (optional)
Status (optional)
Type
Group N/A
Interface Bitmask 0 or 2 = No interfaces
(disable)
1 or 3 = Ethernet
4 or 6 = Wireless A
8 or 10 = Wireless B
12 = Wireless A & B
13 or 15 = All interfaces
(default is 15)
passthru
block
Type
Table N/A
N/A N/A
Octet String N/A
Integer enable (1)
disable (2)
delete (3)
Type
Table N/A
N/A N/A
PhysAddress User Defined
PhysAddress User Defined
PhysAddress User Defined
PhysAddress User Defined
DisplayString max 255 characters
Integer enable (default)
disable
delete
Value Access
R
RW
RW
Value Access
R
R
RW
RW
RW
Value Access
R
R
RW
RW
RW
RW
RW
RW
AP-4000 Series User Guide
CLI Parameter
etherflt
etherfltifbitmask
etherfltoptype
CLI Parameter
etherflttbl
index
protonumber
protoname
status
CLI Parameter
staticmactbl
index
wiredmacaddr
wiredmask
wirelessmacaddr
wirelessmask
cmt
status
202