Installation and Initialization
Hardware Installation
Hardware Installation
NOTE:
Before installing and using this product, see the
NOTE:
Avant l'installation et l'utilisation de ce produit, veuillez vous référer à la partie «
Compliance
» (conformité aux réglementations).
NOTA:
Prima di installare ed utilizzare questo prodotto, fare riferimento alla sezione relativa alla
Compliance" (conformità alle norme).
ANMERKUNG:
Bitte lesen Sie vor der Installation und Verwendung dieses Produkts im Abschnitt
Compliance".
NOTA:
Antes de instalar y usar este producto, consulte la sección
de la normativa).
注記 :
製品をインストールしてご使用になる前に、
に関する重要な事項を確認してください .
Required Materials
•
AP-4000/4000M/AP-4900M unit
•
Mounting bracket with screws
•
Power adapter
•
Security cover
•
Quick Start Flyer
Perform the following procedures to install the AP hardware:
•
Cabling the AP-4000/4000M/4900M
•
Installing the Security Cover
•
Mounting the AP-4000/4000M/4900M
•
Installing External Antennas
Cabling the AP-4000/4000M/4900M
Connect cables to the AP as follows:
1. Provide power to the AP, as follows:
a. Plug the power cord into the power jack (the left port) and connect the unit to an AC power outlet (100~240V,
50~60Hz).
b. If using Active Ethernet, connect power to the unit from a DC injector device, such as the ORiNOCO 1-Port Active
Ethernet DC Injector hub.
Regulatory Compliance
"Regulatory
Compliance」セクションを参照し、使用許諾
の「Regulatory
AP-4000 Series User Guide
section.
Regulatory
"Regulatory
„Regulatory
Compliance" (Cumplimiento
25