Retrieve File Via Http - Proxim AP-4000 User Manual

Commands
Retrieve File
– Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
• File Name: Enter the name of the file to be uploaded.
• File Type: Select the type of file to be uploaded: Config file, CLI Batch File, or CLI Batch (Error) Log.
Use the following procedure to retrieve a file from an AP to a TFTP server:
1. If retrieving a Config file, configure all the required parameters in their respective tabs. Reboot the device.
2. Retrieve and store the file. Click the Retrieve File button to initiate the upload of the file from the AP to the TFTP
server.
3. If you retrieved a Configuration file, update the file as necessary.
4. If you retrieved a CLI Batch File or CLI Batch Log, you can examine the file using a standard text editor. For more
information on CLI Batch Files, see
Figure 6-7 Retrieve File via TFTP Command Screen

Retrieve File via HTTP

Use the Retrieve File via HTTP tab to retrieve configuration files, CLI Batch Files, or CLI Batch Logs from the AP. Select
the type of file (Config, CLI Batch File, or CLI Batch Log) from the File Type drop-down menu.
For more information on CLI Batch Files and CLI Batch Logs see
CLI Batch File.
AP-4000 Series User Guide
CLI Batch File.
144