Network Parameters - Proxim ORiNOCO AP-4900M User Manual

Command Line Interface (CLI)
Parameter Tables
Inventory Management Information
The inventory management commands display advanced information about the AP's installed components. You may be
asked to report this information to a representative if you contact customer support.
Name
System Inventory
Management
Component Table
Component Interface
Table

Network Parameters

IP Configuration Parameters
Name
Network
IP Configuration
IP Address
IP Mask
Default Router IP
Address
Default TTL
Address Type
NOTE: The IP Address Assignment Type (ipaddrtype) must be set to static before the IP Address (ipaddr), IP Mask
(ipmask) or Default Gateway IP Address (ipgw) values can be entered.
Type
Subgroup N/A
Subgroup N/A
Subgroup N/A
Type
Group N/A
Group N/A
IpAddress User Defined
IpAddress User Defined
IpAddress User Defined
Integer User Defined (seconds)
0 - 255, 64 (default)
Integer static
dynamic (default)
AP-4000/4000M/4900M User Guide
Value Access
R
R
R
Value Access
R
R
RW
RW
RW
RW
RW
CLI Parameter
sysinvmgmt
sysinvmgmtcmptbl
sysinvmgmtcmpiftbl
CLI Parameter
network
ip (Note: The network and
ip parameters display the
same information)
ipaddr
ipmask
ipgw
ipttl
ipaddrtype
206