System Settings - Datamax A-Class A-4212 Operator's Manual

Printer Options (continued)
Menu Item
LEADING
TRAILING
LOCK AFTER WRITE
ENABLED
DISABLED
RETRY ATTEMPTS
3 (0 - 9)
PERFORM CALIBRATION
YES
NO
SET DEFAULTS
YES
NO

4.2.4 System Settings

The System Settings menu contains operating, control, and formatting functions:
Menu Item
CONFIGURATION FILE ♦
RESTORE AS CURRENT
SAVE SETTING AS
A-Class
Adds nulls to the front (left) of the data if less than the
size, or cuts the data if greater.
Adds nulls to the end (right) of the data if less than
the size, or cuts the data if greater.
Allows the tag to be locked after programming, where:
Locks the tag.
Does not lock the tag.
Determines the number of function attempts that will
be made, where:
Is the number of retry attempts.
Allows the printer to establish the tag to transducer
distance and nominal power setting, where:
Initiates the process; CALIBRATING RFID will be
displayed as media is scanned for the tag location and
power, followed by TOF positioning and the results
where, if successful, the database parameters will be
updated.
No calibration occurs.
Allows the RFID settings to be restored to the factory
values, where:
Returns the RFID settings to default values.
Retains the current settings.
Controls the creation, storage, and recall of printer
configuration files (see Appendix F), where:
Lists the files available and then, after selection,
reconfigures the printer according to that file.
Saves the effective printer configuration to a named
file of up to nineteen characters.
Details
Details
45