Tools Required; Step 1: Preparing The Printer - Datamax M-Class Mark II Quick Start Manual

Contents of the Thermal Transfer Kit
This kit contains the following items:
Thermal Transfer Assembly
Screws (3)
Follow the steps listed below to install this option.

Tools Required

To install this option you will need a #2 Phillips head screwdriver.

Step 1: Preparing the Printer

 Turn 'Off' the power switch and unplug the printer.
 Open the cover. Remove any installed media from the printer.
 Remove the three Screws that
secure the Cover Plate to the
printer.
 Remove the Cover Plate.
Screws
1
Cover Plate