5
Operating, Adjusting and
Maintaining the Printer
5.1 Displayed Messages
During operation (when not in Menu or Test Mode) the printer displays several types of
information:
Prompts and Condition Messages (see below); and
•
Fault and Warning Messages (see Section 6.1.2).
•
5.1.1 Prompts and Condition Messages
Prompts appear when an action is required during operation, while Condition Messages
indicate an operational state.
Displayed Message
ACCESS DENIED
BUSY.....
CALIBRATING
SENSOR LEVELS
CALIBRATION COMPLETE
CANCEL BATCH
ENTER KEY = YES!
A-Class
Prompts and Condition Messages
Description
The password used to access
the secured menu was incorrect.
The printer is performing
internal operations.
The FEED Key was pressed and
held.
Calibration has finished.
The CANCEL or TEST Key was
pressed during a multiple label
job.
Action
Enter the correct password.
Allow the operations to
complete.
Allow the calibration to
complete.
Normal operation can
resume.
Press ENTER to cancel all
remaining labels in the job.
71