Print Control - Datamax A-Class A-4212 Operator's Manual

Media Settings (continued)
Menu Item
CLEAN HEAD NOW?
YES
NO

4.2.2 Print Control

The Print Control menu contains print quality, throughput, formatting, and custom setup
functions:
Menu Item
HEAT
10 (0 – 30)
PRINT SPEED
XX.Xin/sec (X – XX)
FEED SPEED
XX.Xin/sec (X – XX)
REVERSE SPEED
X.Xin/sec (X – X)
SLEW SPEED
XX.Xin/sec (X – XX)
A-Class
Allows cleaning to begin, where:
Initiates the cleaning process when using Cleaning
Cards or Cleaning Film (see Section 5.5.1) and resets
the Clean Head Counter.
Exits the menu item without cleaning.
Controls the burn-time of the printhead (selectable as
"Heat" in most labeling programs), where:
Is the number based on duration, corresponding to
print darkness.
Controls the rate of label movement during printing,
where:
Is the speed setting; see Appendix B for the model
dependant default and range.
Slower speeds may be required to print detailed
images, while faster printing may require an
increased HEAT setting for sufficient energy
transfer.
Controls the rate of label movement between printing
areas, where:
Is the speed setting; see Appendix B for the model
dependant default and range.
Controls the rate of label movement during backup
positioning, where:
Is the speed setting; see Appendix B for the default
and range.
Controls the rate of label movement between printing
areas when using the GPIO function, where:
Is the speed setting; see Appendix B for the default
and range.
Details
Details
37