Datamax A-Class A-4212 Operator's Manual page 73

Communications (continued)
Menu Item
MTU
01500
(512 - 65515)
GRATUITOUS ARP
0000 (0 - 2048)
PORT NUMBER
09100 (1 - 65535)
DUPLEX CAPABILITY
AUTO-NEGOTIATE
100BASET HALF
100BASET FULL
10BASET HALF
10BASET FULL
ADVERTISE CAPABILITY
AUTOMATIC
ALL CAPABILITIES
NETWORK REPORT
A-Class
Sets the Maximum Transmission Unit packet size,
where:
Is the packet size, in bytes.
Sets the Address Resolution Protocol notification rate,
where:
Is the time, in minutes.
Sets the network communications port, where:
Is the Port Number.
Sets the communication capability for the Wired
network, where:
Automatically selects the best type.
Selects 100 Mbit/s half duplex (in both directions, one
way at a time) operation.
Selects 100 Mbit/s full duplex (in both directions,
simultaneously) operation.
Selects 10 Mbit/s half duplex (in both directions, one
way at a time) operation.
Selects 10 Mbit/s full duplex (in both directions,
simultaneously) operation.
Transmits the printer's communication capability for
the Wired network, where:
Advertises the DUPLEX CAPABILITY set value.
Advertises all possible values for DUPLEX CAPABILITY.
Prints a network status report (example below):
NETWORK REPORT
WED 03:15PM 23JUL2008
CURRENT PRINTER INFO
MACO: 00:0D:70:0B:8B:B9
IP ADDRESS: 192.168.10.26
SUBNET MASK: 255.255.255.0
GATEWAY: 192.168.10.26
DHCP: ENABLED
SNMP: ENABLED
PORT NUMBER: 9100
NETBIOS NAME: DMX_038BB9
WLAN MODULE
MODULE FW VERSION: 4.3.0.24
RADIO FW VERSION: 1.1.1.111.8.4.0.145
PORT STATUS: CONNECTED: ESS
SSID: 000B2802D55E
MACR: 00:0B:28:02:D5:5E
BSS ADDRESS: PROVIDED BY DHCP
Details
59