Approved Media And Ribbon - Datamax A-Class A-4212 Operator's Manual

7.2 Approved Media and Ribbon

Media (and ribbon for thermal transfer) is an important determinant in the throughput,
quality, and performance of the printed product. The following overview is an introduction to
the different types of material that can be used in the printer. For complete information and
advice regarding a specific application, consult a qualified media specialist or a Datamax
Media Representative. Also available is an informative white paper, "A Brief Introduction to
Media," which can be found on our website at
Direct Thermal
Consider three important factors when selecting direct thermal stock:
The abrasiveness of the material that covers the thermal reactive layer of the paper;
•
The amount of heat required to start the chemical reaction; and,
•
The ability of the media to control that chemical reaction.
•
Thermal Transfer
Consider three important factors when selecting thermal transfer media and ribbon
combinations:
Label top coating and ribbon combinations may affect image quality;
•
Ribbon back coating can provide printhead protection and, depending upon the formula,
•
help reduce static buildup; and,
The ribbon width, when slightly wider than the media, can also guard the printhead
•
against media abrasion.
Media and Ribbon Selection
To achieve optimum print quality and maximum printhead life, we specify the use of
®
DATAMAX brand media. These supplies are specially formulated for use in our printers;
use of non-Datamax supplies may affect the print quality, performance, and life of the
printer or its components. For a current list of approved media, please contact a Media
Representative at (407) 523-5650.
Suggested applications are listed below:
Direct Thermal Media
Datamax DTL-HSM
Datamax DTL-HSH
120
www.datamaxcorp.com
Media and Ribbon Overview
Print
Speed*
10 – 12**
10 – 12**
Print Image
Energy Durability
Medium
Medium
Low
Low
A-Class