Adjusting The Media Sensor - Datamax A-Class A-4212 Operator's Manual

3.2 Adjusting the Media Sensor

Position the Media Sensor to detect labels as follows:
1. Ensure that media is routed through the Media Sensor; see Section 3.1.
Media
Media Sensor
Media
Eye Mark
Media Sensor
Adjustment Knob
2. Depending on the type of media being used, rotate the Media Sensor Adjustment Knob
until the Eye Mark on the Media Sensor is positioned according to the table below.
Media Sensor Adjustment and Type Required
Media Type Eye Mark Position Sensor Type Required
Die-cut Centered over the label
Gap*
Notched Centered over the notch
Reflective Centered over the black mark Reflective
Continuous Near the middle of the media Continuous
* Default setting; see Section 4.2.1.
A-Class 25