Setting Up The Printer; Loading Media - Datamax A-Class A-4212 Operator's Manual

3

Setting up the Printer

3.1 Loading Media

Load media according to its type and desired output:
1. Open the Access Cover and raise the Head Lift Lever.
2. Route the Media between the Media Posts, through the Media Sensor, over the Peel Bar,
and out of the printer, as shown below.
Access Cover
Media
Media Posts
3. To peel die-cut labels after printing, press down on the Peel Assembly Release Lever to
lower the Peel Assembly; otherwise, proceed directly to Step 6.
A-Class
Head Lift Lever
Media Sensor
21