Datamax A-Class A-4212 Operator's Manual page 71

Communications (continued)
Menu Item
WLAN ADHOC
NO
YES
SET FACTORY DEFAULTS
NO
YES
WLAN
MODE
ENABLED
DISABLED
BSS ADDRESS
000.000.000.000
SIGNAL READINGS
IP ADDRESS
192.168.010.026
SUBNET MASK
255.255.255.000
A-Class
Selects the DMXrfNETII default parameters, where:
Exits the menu item without changing the current
settings.
Restores WiFi defaults and initiates infrastructure
mode with an SSID of "Any." All existing access point
associations will be deleted then established with the
closest available. (Useful when moving the printer to a
geographically distant location.)
Returns the factory-programmed values, where:
Exits the menu item without changing the current
settings.
Restores the default settings.
Controls the communications settings for the
DMXfNetII Card, where:
Selects between Wired or WiFi operation, where:
Enables the WiFi interface.
Enables the wired interface.
Specifies the static IP address of the WiFi bridge
module.
If DHCP is Enabled, this parameter will be ignored.
Is the address in standard octet format.
Displays the signal and noise ratios for the WLAN.
Specifies the static IP Address; where:
Is the address in standard octet format.
Specifies the static Subnet Mask Address, where:
Is the address in standard octet format.
Details
57