Communications - Datamax A-Class A-4212 Operator's Manual

System Settings (continued)
Menu Item
0.50in (.10 to 2.00)
RETRY COUNT
1 (0 – 3)
BACKFEED ON CLEAR
ENABLED
DISABLED
SCL FONT BOLD FACTOR
(1 – 36)
08

4.2.5 Communications

The Communications menu contains interface port and host control functions:
Menu Item
SERIAL PORT A ♦
BAUD RATE
54
Is the distance, measured from the trailing edge,
which indirectly establishes the text size.
VOID will not be printed if insufficient label space
exists or if the fault occurred after printing
completed. Also, the text can be customized; see
the Class Series 2 Programmer's Manual.
Sets the number of printing attempts before declaring
a fault, where:
Is the count.
Greater than 1 (one) counts are valid only when
Linear Scanner or RFID equipped.
Determines positioning after a fault is cleared, where:
Automatically positions the label.
No label positioning occurs, as the location is assumed
correct.
If reloading, the user must place media at the
SOP position.
Sets a scalable font boldfacing amount, where:
Is the setting, based on an incrementing scale where
eight (08) is nominal.
Controls the RS-232 communications settings for
Serial Port A, where:
Sets the serial communication rate, where:
Details
Details
A-Class