Ready Mode - Datamax A-Class A-4212 Operator's Manual

4.1.1 Ready Mode

In Ready Mode, when the printer is idle waiting to accept data, the Keys have the following
functions:
Key Labels
Key
The MENU Key takes the printer offline and into Menu Mode; see Section
4.2. (When shaded, this denotes that security is enabled and password
entry is required; see Section 4.2.4.)
MENU
The PAUSE Key temporarily suspends printing, as noted by the Current
PAUSE
State Indicators. Pressing the key again will return normal operation.
The FEED Key advances one label and clears any corrected faults. Also,
FEED
pressing and holding this key causes calibration; see Section 3.4.
The CANCEL Key pauses operation and then prompts you for confirmation.
If yes, the current job is cancelled and the printer remains paused. Also,
CANCEL
pressing and holding this key resets the printer; see Section 5.6.1.
The TEST Key takes the printer offline and into Test Mode; see Section
4.3. (When shaded, this denotes that security is enabled and that a
password must be entered to proceed; see Section 4.2.4.) Also, pressing
TEST
and holding this key evokes the printhead cleaning routine for use with
Cleaning Cards or Cleaning Film; see Section 5.5.1.
32
TUE 11:55 A 04 FEB 2003
READY
DATAMAX
MENU PAUSE
Keys
While in Ready Mode, pressing and holding this key will adjust
the display contrast.
FEED CANCEL TEST
Function
A-Class