Brake Back Plate - Suzuki Wagon R Plus RB310 Service Manual

Brake back plate bolt
Brake dram screw
Spindle nut
Wheel bolt
Material
Water tight SUZUKI SEALING COMPOUND 366E
sealant (99000-31090)
8) Install wheel and tighten wheel bolts to specified torque.
9) Upon completion of all jobs, depress brake pedal with about
10) Install console box cap.
11) Check to ensure that brake drum is free from dragging and
12) Check each installed part for oil leakage.
Brake Back Plate (for 4WD Model)
Refer to "Rear Axle Shaft and Wheel Bearing (for 4WD Model)" in
Section 3E.
Tightening Torque Specifications
Fastening part
Required Service Material
Recommended SUZUKI product
(Part Number)
Tightening torque
Wheel bolt (a): 95 N·m (9.5 kg-m, 69.0 lb-ft)
300 N (30 kg, 66 lbs) load at least 10 – 15 times until
adjuster actuator clicking sound from drum brake can not be
heard so as to obtain proper drum-to-shoe clearance.
Adjust parking brake cable. (For adjustment, refer to "Parking
Brake Inspection and Adjustment" in Section 5.)
proper braking is obtained. Then remove vehicle from hoist
and perform brake test (foot brake and parking brake).
N•m
24
175
95
• To apply to mating surfaces of brake back
plate and rear axle
• To apply to mating surfaces of brake back
plate and parking brake cable.
PARKING AND REAR BRAKE 5C-11
Tightening torque
kg-m
2.4
9 9.0
17.5
9.5
Use
lb-ft
17.5
6.5
126.5
69.0