Suzuki Wagon R Plus RB310 Service Manual page 665

7B1-96 AUTOMATIC TRANSAXLE (M13 ENGINE)
"R" "N" "D"
"P"
Adjustment
1) Shift manual shift lever to "N" range (transmission range sen-
"2"
"L"
2) Remove adjuster (cable end) from selector lever pin of selec-
3) Release lock plate (1) which restrict moving of cable end
4) Push cable end holder (1) out from eye-end (2) using an
5) Shift selector lever to "N" position.
6) Apply grease to selector lever pin and install adjuster (cable
Grease 99000-25010
7) With both selector lever and transmission range sensor kept
8) Slide lock plate (2) to secure cable end holder in position.
9) After select cable was installed, check for the following.
• Push vehicle with selector lever shifted to "P" range.
• Vehicle can not be driven in "N" range.
• Vehicle can be driven in "D", "2" and "L" ranges.
• Vehicle can be backed in "R" range.
sor "N" range).
tor lever assembly.
holder (2).
appropriate tool (3) to disengage cable.
end) to it.
each "N" position, drive cable end holder (1) in until it locks
cable.
Vehicle should not move.