Table of Contents
Advertisement
1
3
5
Air Cleaner Element Inspection and Cleaning
• Check air cleaner element for dirt. Replace excessively dirty
element.
• Blow off dust by compressed air from air outlet side of ele-
ment.
Knock Sensor Removal and Installation
Refer to "Knock Sensor Removal and Installation" in Section 6E2.
Cylinder Head Cover Removal and Installa-
tion
Removal
1) Disconnect negative cable at battery.
2) Disconnect MAF sensor coupler (1).
2
3) Remove EVAP canister purge valve (2).
4) Remove air cleaner case (3) and resonator (4).
5) Remove cylinder head upper cover (5).
4
6) Disconnect ignition coil couplers (1).
7) Remove ignition coil assemblies (2) with high-tension cord
(3).
8) Remove wire harness clamp (4) from cylinder head cover.
ENGINE MECHANICAL (M13 ENGINE) 6A2-17
Advertisement
Table of Contents
