Oil Pan Bolt; Fluid Outlet Union; Fluid Cooler Pipe Bolt; Fluid Filler Tube Bolt - Suzuki Wagon R Plus RB310 Service Manual

(d)
(c)
77) Install oil cleaner magnets (1) in oil pan (2).
NOTE:
If metal particles are attached to the magnets, clean them
before installing.
78) Install new oil pan gasket (1) between transaxle case and oil
pan (2).
Tightening torque

Oil pan bolt

(a): 7.0 N·m (0.7 kg-m, 5.0 lb-ft)
79) After applying A/T fluid to new O-ring, fit it to fluid inlet union
(1). Then install fluid outlet union to transaxle case.
(b)
Tightening torque

Fluid outlet union

(a): 25 N·m (2.5 kg-m, 18.0 lb-ft)
2
80) Install new gasket (2) and then install fluid cooler pipes.
1,(a)
Tightening torque

Fluid cooler pipe bolt

(b): 22 N·m (2.2 kg-m, 16.0 lb-ft)
Fluid cooler pipe bracket bolt
(b)
(c): 10 N·m (1.0 kg-m, 7.5 lb-ft)
81) After applying A/T fluid to new O-ring, fit it to fluid filler tube.
Then install fluid filler tube to transaxle case.
2
Tightening torque

Fluid filler tube bolt

(d): 10 N·m (1.0 kg-m, 7.5 lb-ft)
AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-199