Setting Up The Zt-Usb Series; Introduction Of Configurations - ICP DAS USA ZT-USBC User Manual

5
Setting up the ZT‐USB Series
5.1 Introduction of configurations
1. "Pan ID" is the group identity of a ZigBee network, and must be the same if they
are in the same ZigBee network.
(Valid values range from 0x0000 to 0x3FFF)
2. "Node ID" is the identity of the ZigBee module.
The identity number must be unique if it is in the same ZigBee network as other
ZigBee module. (Valid values range from 0x0001 to 0xFFF7 for a ZigBee Router,
but is fixed to 0x0000 for a ZigBee Coordinator)
3. "RF Channel" indicates the radio frequency channel, and must be set to the same
channel if the module is in the same ZigBee network as other ZigBee modules
Channel
Frequency(MHz) 2405
In addition, the RF channels 0x04, 0x09, 0x0E and 0x0F are recommended because
※
they are not covered with the frequency of Wi-Fi.
2400 00
MHz
ICP DAS, ZT‐USB Series User Manual, Version 1.0
Copyright @ 2013 by ICP DAS Co., Ltd. All Rights Reserved.
0x00
802.11b/g
Channel 1
01 02 03 04 05
0x01 ......
2410 ......
802.11b/g
Channel 6
06 07 08 09
0x0F
2480
802.11b/g
Channel 11
0A 0B 0C 0D 0E
802.11b/g Channel (North America)
802.15.4 Channel
Page 19
.
0F 2485
MHz