Set The "Pair Connection" Parameter - ICP DAS USA I-7530A-MR-FD User Manual

Figure 3-12: The actual value of Baud Rate

Set the "Pair Connection" parameter

3.2.5
When users select the "Pair Connection" communication mode, the
functions, "End of Command", "Fixed Tx CAN ID" and "Response with
CAN ID", are useful. In pair connection mode, all commands written to I-
7530A-MR-FD COM port will be transferred to the CAN bus directly. For
more detail information about pair connection mode, please refer to the
section 3.4.
Figure 3-13: The configuration for Pair connection.
I-7530A-MR-FD Modbus RTU to CAN Converter User's Manual (Version 1.0, 08/2022) ------------- 30