Software Utility - ICP DAS USA I-7530A-MR-G User Manual

3. Software Utility

The UART2CAN Utility tool can be used to configure the operational
conditions of the I-7530A-MR between the CAN and RS-232/485/422
communications. It also can used to transmit or receive a CAN message
for simple testing. To start the "UART2CAN Utility", please install the
UART2CAN Utility setup file and run the UART2CAN_Utility.exe file. The
screenshot of the configuration and testing screen are given in the below
figure. The next section will show you how to configure the I-7530A-MR
and test it by using UART2CAN Utility.
Figure 3-1: Configuration and testing screen for UART2CAN Utility.
I-7530A-MR Modbus RTU to CAN Converter User's Manual (Version 1.08, 07/2019) ------------- 21